FixVault
Home › Toyota › 2008 › Sienna LE, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection & Installation › Mass Air Flow Meter › Removal

Mass Air Flow Meter: Removal

  1. REMOVE MASS AIR FLOW METER 
    1. Disconnect the mass air flow meter connector.
      2. Fig 1: Locating Mass Air Flow Meter Connector And Screws
      G05136389Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws and mass air flow meter.
About FixVault