FixVault
Home › Toyota › 2008 › Tacoma Base, 4D Pickup, Standard › Repair and Diagnosis › Brakes › Traction Control › Brake Control › Front Speed Sensor › Removal

Front Speed Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE FRONT WHEEL 
  3. REMOVE FRONT SPEED SENSOR 
    1. Disconnect the speed sensor connector.
    2. Remove the bolt and front speed sensor.
      NOTE:
      • Do not attach any foreign matter to the sensor tip.
      • Ensure that no foreign matter enters the sensor installation part.
        Fig 1: Locating Speed Sensor Connector With Bolt
        G05199370Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault