FixVault
Home › Toyota › 2008 › Tacoma PreRunner, 2D Pickup › Repair and Diagnosis › Engine Performance › Engine Control System (2TR-FE) › Accelerator Pedal › Removal

Accelerator Pedal: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY 
    1. Disconnect the accelerator position sensor connector.
      2. Fig 1: Locating Accelerator Position Sensor Connector And Accelerator Pedal Bolts
      G05198037Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts, then remove the accelerator pedal.
About FixVault