FixVault
Home › Toyota › 2008 › Tacoma PreRunner, 2D Pickup › Repair and Diagnosis › Engine Performance › Engine Control System (2TR-FE) › EFI Relay › Inspection

EFI Relay: Inspection

  1. INSPECT EFI RELAY 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard 

        RESISTANCE SPECIFICATION

        Tester Connection Specified Condition
        3 - 5 10 kΩ or higher
        3 - 5 Below 1 Ω
        (Apply battery voltage to terminals 1 and 2)
        Fig 1: Identifying Resistance Between EFI Relay Terminals
        G05677387Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If the result is not as specified, replace the E.F.I, relay.

About FixVault