FixVault
Home › Toyota › 2008 › Tacoma X-Runner › Repair and Diagnosis › Brakes › Traction Control › Brake Control › Rear Speed Sensor › Removal

Rear Speed Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE REAR SPEED SENSOR 
    1. Disconnect the speed sensor connector.
    2. Remove the nut and speed sensor rear.
      NOTE:
      • Do not attach any foreign matter to the sensor tip.
      • Ensure that no foreign matter enters the sensor installation hole.
        Fig 1: Locating Rear Speed Sensor Connector
        G05199372Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault