Engine Coolant Temperature Sensor: Installation

INSTALL ENGINE COOLANT TEMPERATURE SENSOR
1. Install a new gasket to the sensor.
2. Install the sensor.
  Torque: 20 N*m (200 kgf*cm, 14 ft.*lbf)
3. Connect the sensor connector.
  
  Fig 1: Locating Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
ADD ENGINE COOLANT . (See REPLACEMENT ).
INSPECT FOR COOLANT LEAK . (See ON-VEHICLE INSPECTION ).
INSTALL V-BANK COVER SUB-ASSEMBLY . (See INTAKE MANIFOLD ).
INSTALL NO. 1 ENGINE UNDER COVER . (See COOLING SYSTEM ).