FixVault
Home › Toyota › 2008 › Yaris Base, 2D Hatchback, Automatic › Repair and Diagnosis › Engine Performance › Engine Control System (1NZ-FE) › Accelerator Pedal › Removal

Accelerator Pedal: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE ACCELERATOR PEDAL ASSEMBLY 
    1. Disconnect the accelerator pedal connector.
    2. Remove the 2 bolts and the accelerator pedal.
      NOTE:
      • Do not drop or strike the accelerator pedal.
      • Do not disassemble the accelerator pedal.
      Fig 1: Identifying Accelerator Pedal With Bolts
      G04828467Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault