FixVault
Home › Toyota › 2008 › Yaris Base, 2D Hatchback, Automatic › Repair and Diagnosis › Engine Performance › Engine Control System (1NZ-FE) › Camshaft Position Sensor › Removal

Camshaft Position Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE CAMSHAFT POSITION SENSOR 
    1. Disconnect the camshaft position sensor connector.
      2. Fig 1: Identifying Camshaft Position Sensor
      G04828386Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and remove the camshaft position sensor.
About FixVault