Front Speed Sensor: Removal

HINT:

• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the LH side.

1. REMOVE FRONT WHEEL 
2. REMOVE FRONT SPEED SENSOR LH 
   1. Disconnect the front speed sensor connector.
      Fig 1: Locating Front Speed Sensor Connector

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Using a hexagon wrench (5 mm), remove the bolt and front speed sensor from the steering knuckle.

      SST 99999-60011 

      NOTE:

      • Do not allow dirt and foreign matter to adhere to the sensor tip.
      • Do not allow dirt and foreign matter into the sensor installation hole.
        Fig 2: Locating Steering Knuckle And Bolt

        Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002