Rear Speed Sensor: Removal

HINT:

• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the LH side.

1. REMOVE REAR WHEEL 
2. REMOVE REAR SPEED SENSOR LH 
   1. Disconnect the rear speed sensor connector.
      Fig 1: Locating Rear Speed Sensor Connector

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the nut and rear speed sensor from the axle hub.
      NOTE:

      • Do not allow dirt and foreign matter to adhere to the sensor tip.
      • Do not allow dirt and foreign matter into the sensor installation hole.
        Fig 2: Locating Rear Speed Sensor And Nut

        Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002