General Maintenance
HINT:
Inspect these items on a cooled down engine.
- REPLACE TIMING BELT TIMING BELT CHART
Type See procedures 2UZ-FE See INSTALLATION - INSPECT DRIVE BELT DRIVE BELT CHART
Type See procedures 1GR-FE See ON-VEHICLE INSPECTION 2UZ-FE See INSPECTION - REPLACE SPARK PLUGS SPARK PLUGS CHART
Type See procedures 1GR-FE See INSPECTION 2UZ-FE See INSPECTION - REPLACE ENGINE OIL AND OIL FILTER ENGINE OIL AND OIL FILTER CHART
Type See procedures 1GR-FE See ON-VEHICLE INSPECTION 2UZ-FE See ON-VEHICLE INSPECTION - REPLACE ENGINE COOLANT ENGINE COOLANT CHART
Type See procedures 1GR-FE See ON-VEHICLE INSPECTION 2UZ-FE See ON-VEHICLE INSPECTION - INSPECT EXHAUST PIPES AND MOUNTINGS
- Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.
- INSPECT BATTERY BATTERY CHART
Type See procedures 1GR-FE See ON-VEHICLE INSPECTION 2UZ-FE See ON-VEHICLE INSPECTION - INSPECT AIR CLEANER FILTER
- Remove the air filter.
- Visually check that the air filter is not excessively damaged or oily. If necessary, replace the air filter.
- Reinstall the air filter.
- REPLACE AIR CLEANER FILTER
- Replace the air filter with a new one.
- INSPECT FUEL TANK CAP GASKET FUEL TANK CAP GASKET CHART
Type See procedures 1GR-FE See ON-VEHICLE INSPECTION 2UZ-FE See ON-VEHICLE INSPECTION - INSPECT FUEL LINES AND CONNECTIONS AND FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BANDS
- Visually check the fuel lines for cracks, leakage, loose connections, deformation or tank band looseness.
- INSPECT CHARCOAL CANISTER CHARCOAL CANISTER CHART
Type See procedure 1GR-FE See ON-VEHICLE INSPECTION 2UZ-FE See ON-VEHICLE INSPECTION - INSPECT VALVE CLEARANCE VALVE CLEARANCE CHART
Type See procedure 1GR-FE See VALVE CLEARANCE 2UZ-FE See VALVE CLEARANCE