System Outlien

Door lock control (Lock and unlock), back window control (Back window open) and panic control (Theft alarm and flash) is performed by remote control, using low-power electrical waves emitted by a transmitter, without the ignition key needing to be inserted in the door key cylinder.

1. Normal Operation 

   * Lock operation

   If the lock SW on the transmitter is pressed, all the doors will be locked.

   * Unlock operation

   If the unlock SW on the transmitter is pressed once, only the driver door will be unlocked. When If the unlock SW is pressed again within 3 seconds, all of the doors will be unlocked.

2. Auto Lock Function 

   If a door is not actually opened within 30 seconds of being unlocked by the unlock SW on the transmitter, all the doors will be automatically locked. Further, if any of the following conditions are detected, the wireless door lock will not function.

   * Any door is open.

   * The ignition key is inserted into the ignition SW.

   * When the lock detection SW on all the doors indicates they are already locked.

3. Wireless Door Lock Stop Function 

   If any of the following conditions are detected, the wireless door lock will not function.

   Lock operation

   * When any door is open (Door courtesy SW on)

   * The ignition key is inserted into the ignition SW (Unlock warning SW on)

   * Ignition SW is on

   Unlock operation

   * Ignition SW is on

4. Buzzer Sound Function 

   During a lock operation, when the body ECU receives the lock signal from the door lock detection SW, the wireless door lock buzzer sounds once. During an unlock operation, when the body ECU receives the unlock signal from the door lock detection SW, the wireless door lock buzzer sounds twice.

   If any door is open when the body ECU receives a lock signal from the transmitter, the wireless door lock buzzer sounds for approx. 10 seconds. If the door is closed, or the ignition SW is on, or if the unlock signal is received from the transmitter while the buzzer is on, the buzzer stops.

5. Visual Confirmation of Lock or Unlock 

   During a lock operation, when the body ECU receives a lock signal from the door lock detection SW, the turn signal lights will be flashed once. During an unlock operation, when the body ECU receives an unlock signal from the door lock detection SW, the turn signal lights will be flashed twice.

6. Remote Panic Operation 

   The panic operation will function regardless of if the doors are locked or unlocked or open or closed. When the panic button (Transmitter) is pushed once, the interior lights will light up, and the theft alarm and horn will sound and the turn signal lights, headlights and taillights will flash. Then, if the panic button or the unlock button (Transmitter) is pushed once more, interior lights will be turned off, and the sounding and flashing will stop. The panic operation will not function when ignition key is in ignition key cylinder.

7. Repeat Function 

   If the lock detection signal, which is sent in response to the output signal, is not received after the body ECU has output the lock signal, the lock signal will be output again.

8. Buzzer Volume Control 

   The volume of the wireless door lock buzzer can be set at 5 different levels by operating the transmitter, when the ignition SW is off, any door is open, and the ignition key is not in the ignition key cylinder.

9. Illuminated Entry Function 

   When the body ECU detects a door has been unlocked after an unlock operation has been made, it turns on various lights, such as the ignition key cylinder light and interior light for approx. 15 sec. If all the doors are locked during this period, the lighting will be cancelled and the lights will immediately fade out.