FixVault
Home › Toyota › 2009 › Avalon XLS › Repair and Diagnosis › Body & Frame › Door Locks › Engine Immobilizer › Engine Immobilizer System › DTC Check/Clear

DTC Check/Clear

  1. CHECK DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the tester on.
    4. Enter the following menus: Body Electrical/Immobilizer or Engine/Trouble Codes.
    5. Check the details of the DTC (s) (See DIAGNOSTIC TROUBLE CODE CHART ).
  2. CLEAR DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the tester on.
    4. Enter the following menus: Body Electrical/Immobilizer or Engine/Trouble Codes.
    5. Erase the DTCs.
About FixVault