Canceling the Set Speed

If any of the following signals are received by the cruise control micro computer while the cruise control is active, the system will be cancelled. (The set speed will be retained)

1. The brake pedal is depressed. (Stop light SW signal is received)
2. The "D" position circuit in park/neutral position SW is turned on and then off

If any of the following signals are received by the cruise control micro computer while the cruise control is active, the system will be cancelled. (The set speed will not be retained.)

1. The transmission is changed from "D" or "N".
2. The transmission is in the "S" position, and is changed from "5" or "4" to "N", "3", "2" or "1".
3. The control lever is pulled in the "CANCEL" direction.
4. The ON-OFF SW is turned OFF.
5. The VSC system is activated.