FixVault
Home › Toyota › 2009 › Avalon XLS › Repair and Diagnosis › External Pages › Different car › Section 23 (Cruise Control System) › Laser Sensor › Removal

Laser Sensor: Removal

WARNING: This page is about a different car, the 2008 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  2. REMOVE RADIATOR GRILLE SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE FRONT BUMPER ASSEMBLY (w/o Fog Light)  (See REMOVAL )
  4. REMOVE FRONT BUMPER ASSEMBLY (w/ Fog Light)  (See REMOVAL )
  5. REMOVE FRONT BUMPER ENERGY ABSORBER  (See REMOVAL )
  6. REMOVE FRONT BUMPER REINFORCEMENT  (See REMOVAL )
  7. REMOVE LASER SENSOR 
    1. Disconnect the connector.
    2. Disengage the clamp, then remove the laser sensor.
About FixVault