FixVault

Fog Light Assembly Components: Installation

WARNING: This page is about a different car, the 2008 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FOG LIGHT ASSEMBLY 
    1. Engage the guide.
    2. Install the fog light assembly with the 2 screws.
  2. INSTALL FRONT BUMPER ASSEMBLY  (See INSTALLATION )
  3. INSTALL RADIATOR GRILLE SUB-ASSEMBLY  (See INSTALLATION )
    Fig 1: Identifying Fog Light Assembly Screws
    G05410052Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
  5. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT  (See ADJUSTMENT  )
  6. PREPARATION FOR FOG LIGHT AIMING  (See ADJUSTMENT  )
  7. INSPECT FOG LIGHT AIMING  (See ADJUSTMENT  )
  8. ADJUST FOG LIGHT AIMING  (See ADJUSTMENT  )