FixVault
Home › Toyota › 2009 › Avalon XLS › Repair and Diagnosis › External Pages › Different car › Section 32 (Lighting) › Headlight Assembly › Installation

Headlight Assembly: Installation

WARNING: This page is about a different car, the 2008 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL HEADLIGHT ASSEMBLY 
    1. Connect the connectors.
      Fig 1: Identifying Headlight Bracket Claws
      G05410016Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the headlight assembly with the 2 bolts and screw.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

  2. INSTALL FRONT BUMPER ASSEMBLY (w/o Fog Light)  (See INSTALLATION )
  3. INSTALL FRONT BUMPER ASSEMBLY (w/ Fog Light)  (See INSTALLATION )
  4. INSTALL RADIATOR GRILLE SUB-ASSEMBLY  (See INSTALLATION )
    Fig 2: Locating Headlight Assembly Bolts And Screw
    G05410015Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for HID Headlight) 

    HINT:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See PRECAUTION  ).

  7. VEHICLE PREPARATION FOR HEADLIGHT AIMING ADJUSTMENT  (See ADJUSTMENT  )
  8. PREPARATION FOR HEADLIGHT AIMING (Using a headlight aim test machine)  (See ADJUSTMENT  )
  9. PREPARATION FOR HEADLIGHT AIMING (Using a Screen)  (See ADJUSTMENT  )
  10. INSPECT HEADLIGHT AIMING  (See ADJUSTMENT  )
  11. ADJUST HEADLIGHT AIMING  (See ADJUSTMENT  )
  12. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT (w/ Fog Light)  (See ADJUSTMENT  )
  13. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light)  (See ADJUSTMENT  )
  14. INSPECT FOG LIGHT AIMING (w/ Fog Light)  (See ADJUSTMENT  )
  15. ADJUST FOG LIGHT AIMING (w/ Fog Light)  (See ADJUSTMENT  )
About FixVault