FixVault
Home › Toyota › 2009 › Avalon XLS › Repair and Diagnosis › External Pages › Different car › Section 4 (Meter) › Combination Meter › Installation

Combination Meter: Installation

WARNING: This page is about a different car, the 2008 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL COMBINATION METER ASSEMBLY 
  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 
  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER 
  4. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY 
  5. INSTALL INSTRUMENT PANEL FINISH PLATE (w/o Smart Key System) 
    Fig 1: Identifying Combination Meter Glass Claws
    G05006174Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH NO. 2 
  7. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH NO. 1 
  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  9. PERFORM INITIALIZATION 
    1. Some systems need initialization when disconnecting the cable from the negative battery terminal (See INITIALIZATION ).
About FixVault