FixVault

Inspection Procedure

WARNING: This page is about a different car, the 2008 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SURROUNDING CONDITIONS 
    1. Check if the cellular phone can make calls in a certain place.

      OK: Calls can be made. 

    NG: END (CELLULAR PHONES CAN ONLY FUNCTION IN CELLULAR SERVICE AREAS) 

    OK: Go to Next Step 

  2. CHECK RECEPTION 
    1. Press the "OFF HOOK" switch on the steering pad switch assembly.
    2. Check the "Bluetooth" connection indicator ("BT" indicator).
      Fig 1: Locating Bluetooth Connection Indicator ("BT" Indicator)
      G05407970Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Result 

      RESULT CHART

      Condition Procedure
      Connection mark is displayed Replace radio receiver.
      No connection mark is displayed Select a registered cellular phone or register a "Bluetooth" compatible phone.
      Bring the cellular phone to a location where the "BT" mark is displayed.

    NEXT : END