FixVault
Home › Toyota › 2009 › Avalon XLS › Repair and Diagnosis › External Pages › Different car › Section 41 (Audio System & Visual System) › Radio Receiver › Removal

Radio Receiver: Removal

WARNING: This page is about a different car, the 2008 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO. 1  (See REMOVAL )
  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO. 2  (See REMOVAL )
  3. REMOVE INSTRUMENT PANEL FINISH PLATE (w/o Smart Key System)  (See REMOVAL )
  4. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER  (See REMOVAL )
  6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET 
    1. Remove the 4 bolts and pull the radio receiver assembly w/ bracket toward you.
    2. Disconnect all connectors and remove the radio receiver assembly w/ bracket.
      Fig 1: Identifying Radio Receiver Assembly Bolts
      G05006274Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE RADIO BRACKET NO. 1 
    1. Remove the 3 bolts and radio bracket No. 1 from the radio receiver assembly w/ bracket.
      Fig 2: Identifying Radio Bracket No 1 Bolts
      G05006275Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE RADIO BRACKET NO. 2 
    1. Remove the 3 bolts and radio bracket No. 2 from the radio receiver assembly w/ bracket.
  9. REMOVE RADIO RECEIVER ASSEMBLY 
About FixVault