FixVault
Home › Toyota › 2009 › Camry Base, Automatic › Repair and Diagnosis › Body & Frame › Windows › Windshield/Window Glass (Except Hybrid) › Power Window Control System › DTC B2313 Glass Position Initialization Incomplete › Inspection Procedure

Inspection Procedure

NOTE: When using the Techstream to troubleshoot the LIN communication line: Connect the Techstream to the vehicle, and turn the courtesy light switch on and off at 1.5 second intervals until communication between the tester and vehicle begins.
  1. CHECK DTC OUTPUT 
    1. Turn the ignition switch off.
    2. Wait for at least 10 seconds, and then turn the ignition switch on (IG).
    3. Check whether the DTC output recurs.

    Result 

    DTC OUTPUT CHART

    Display (DTC Output) Proceed to
    B2313 A
    No output B

    B: END 

    A: Go to Next Step 

  2. SYSTEM INITIALIZE (POWER WINDOW CONTROL SYSTEM) 
    1. Turn the ignition switch on (IG) and initialize the power window regulator motor (on the driver side) (see INITIALIZATION ).
    2. Turn the ignition switch off.
    3. Wait for at least 10 seconds, and then turn the ignition switch on (IG).
    4. Check whether the DTC output recurs.
    INITIALIZE (POWER WINDOW CONTROL SYSTEM)

    Display (DTC Output) Proceed to
    No output A
    B2313 B

    B: REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY FRONT LH 

    A: END 

About FixVault