Camshaft Position Sensor: Installation

INSTALL CAMSHAFT POSITION SENSOR
1. Apply a light coat of engine oil to the O-ring of the sensor.
  NOTE: Make sure that the O-ring is not cracked or jammed when installing it.
  
  Fig 1: Identifying Camshaft Position Sensor O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft position sensor with the bolt.
  Torque: 9.0 N*m (90 kgf*cm, 80 in.*lbf)
3. Connect the camshaft position sensor connector.
Fig 2: Locating Camshaft Position Sensor
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See REMOVAL )
CHECK FOR ENGINE OIL LEAKS
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (See INSTALLATION )