Front Speed Sensor: Removal

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.

1. REMOVE FRONT WHEEL 
2. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH  (See REMOVAL )
3. REMOVE FRONT FENDER LINER  (See REMOVAL )
4. REMOVE FRONT SPEED SENSOR 
   1. Disconnect the front speed sensor connector and clamp.
      Fig 1: Locating Front Speed Sensor Connector And Clamp

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the 2 bolts from the body and the shock absorber assembly.
   3. Disengage the 2 claws from the steering knuckle and body.
      Fig 2: Locating Bolts And Claws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   4. Remove the bolt and the front speed sensor.
      NOTE:

      • Prevent foreign matter from attaching to the sensor tip.
      • Clean the installation hole and the surface for the speed sensor every time the speed sensor is removed.
        Fig 3: Identifying Speed Sensor Bolt

        Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002