Skid Control Sensor: Inspection
- INSPECT SKID CONTROL SENSOR (for BOSCH Made)
- Inspect the skid control sensor. If any of the following occurs, replace the skid control sensor with a new one:
- The surface of the skid control sensor is cracked, dented, or chipped off.
- The connector is scratched, cracked, or damaged.
- The skid control sensor has been dropped.
- Measure the resistance according to the value(s) in the table below.
Standard resistance:
LH
TESTER CONNECTION SPECIFIED CONDITION CHART LHTester Connection Specified Condition 1 (RR+) - 2 (RR-) Below 2.2 kΩ 1 (RR+) - Body ground 10 kΩ or higher 2 (RR-) - Body ground 10 kΩ or higher RH
TESTER CONNECTION SPECIFIED CONDITION CHART RHTester Connection Specified Condition 1 (RL+) - 2 (RL-) Below 2.2 kΩ 1 (RL+) - Body ground 10 kΩ or higher 2 (RL-) - Body ground 10 kΩ or higher If the value is not as specified, replace the skid control sensor.
- Inspect the skid control sensor. If any of the following occurs, replace the skid control sensor with a new one:
- INSPECT SKID CONTROL SENSOR (for ADVICS Made)
- Inspect the skid control sensor. If any of the following occurs, replace the skid control sensor with a new one;
- The surface of the skid control sensor is cracked, dented, or chipped off.
- The connector is scratched, cracked, or damaged.
- The skid control sensor has been dropped.
- Measure the resistance according to the value(s) in the table below.
Standard resistance:
RH
TESTER CONNECTION SPECIFIED CONDITION CHART RHTester Connection Condition Specified Condition 2 (RR+) - 1 (RR-) Always 0.9 to 2.1 kΩ 2 (RR+) - Body ground Always 10 kΩ or higher 1 (RR-) - Body ground Always 10 kΩ or higher LH
TESTER CONNECTION SPECIFIED CONDITION CHART LHTester Connection Condition Specified Condition 2 (RL+) - 1 (RL-) Always 0.9 to 2.1 kΩ 2 (RL+) - Body ground Always 10 kΩ or higher 1 (RL-) - Body ground Always 10 kΩ or higher If the value is not as specified, replace the skid control sensor.
- Inspect the skid control sensor. If any of the following occurs, replace the skid control sensor with a new one;