FixVault
Home › Toyota › 2009 › Camry Hybrid › Repair and Diagnosis › Engine Performance › Engine Control System (Hybrid) › Camshaft Position Sensor › Installation

Camshaft Position Sensor: Installation

  1. INSTALL CAMSHAFT POSITION SENSOR 
    1. Apply a light coat of engine oil to the O-ring of the sensor.
      NOTE: Make sure that the O-ring is not cracked or jammed when installing it.
      Fig 1: Identifying Camshaft Position Sensor O-Ring
      G04973357Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the camshaft position sensor with the bolt.

      Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf) 

      Fig 2: Locating Camshaft Position Sensor
      G04973355Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the camshaft position sensor connector.
  2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY  (See INSTALLATION )
  3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY  (See INSTALLATION )
  4. INSTALL AIR CLEANER INLET ASSEMBLY  (See INSTALLATION )
  5. INSPECT FOR OIL LEAK 
  6. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY  (See INSTALLATION )
About FixVault