FixVault
Home › Toyota › 2009 › Camry Hybrid › Repair and Diagnosis › Engine Performance › Engine Control System (Hybrid) › Engine Coolant Temperature Sensor › Removal

Engine Coolant Temperature Sensor: Removal

  1. DRAIN COOLANT (for Engine)  (See COOLANT (FOR ENGINE) )
  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE AIR CLEANER INLET ASSEMBLY  (See REMOVAL )
  4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the engine coolant temperature sensor connector.
    2. Using SST, remove the engine coolant temperature sensor and gasket.

      SST 09817-33190 

    Fig 1: Identifying Engine Coolant Temperature Sensor And Gasket
    G05008003Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault