FixVault
Home › Toyota › 2009 › Corolla Base, 1.8 L, Standard › Repair and Diagnosis › Body & Frame › Seats › Lumbar Support Adjuster Assembly › Installation

Lumbar Support Adjuster Assembly: Installation

  1. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY 
    1. Install the lumbar support adjuster assembly with the 2 screws.
    2. Connect the connector.
    Fig 1: Identifying Lumbar Support Adjuster Assembly Screws
    G06015080Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT SEATBACK COVER WITH PAD  (See REASSEMBLY )
  3. INSTALL FRONT SEAT CUSHION INNER SHIELD  (See REASSEMBLY )
  4. INSTALL FRONT SEAT INNER BELT ASSEMBLY  (See INSTALLATION )
  5. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY  (See REASSEMBLY )
  6. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB  (See REASSEMBLY )
  7. INSTALL RECLINING POWER SEAT SWITCH KNOB  (See REASSEMBLY )
  8. INSTALL FRONT SEAT ASSEMBLY  (See INSTALLATION )
  9. INSTALL INNER SEAT TRACK COVER  (See INSTALLATION )
  10. INSTALL OUTER SEAT TRACK COVER  (See INSTALLATION )
  11. INSTALL FRONT SEAT HEADREST ASSEMBLY 
  12. INSPECT FRONT SEAT ASSEMBLY  (See INSTALLATION )
  13. INSPECT SRS WARNING LIGHT 

    HINT:

    Inspect the SRS warning light (See DIAGNOSIS SYSTEM ).

About FixVault