Heating / Air Conditioning: Condenser: Reassembly

INSTALL COOLER DRYER
1. Using pliers, install the new cooler dryer to the modulator.
  
  Fig 1: Removing Cooler Dryer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Apply sufficient compressor oil to a new O-ring and the cap fitting surface.
  Compressor oil: ND-OIL 8 or equivalent
  
  Fig 2: Locating Sufficient Compressor Oil To O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a 14 mm straight hexagon wrench, install the new cap to the cooler condenser core.
  Torque: 2.9 N*m (30 kgf*cm, 26 in.*lbf)
  
  Fig 3: Removing Cap From Modulator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 COOLER CONDENSER CUSHION
1. Install the 4 No. 1 cooler condenser cushions.
  
  Fig 4: Installing No 1 Cooler Condenser Cushions
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002