On-Vehicle Inspection

INSPECT DEFOGGER RELAY

Check the resistance.

Using an ohmmeter, measure the resistance between the terminals.

Standard Resistance

TESTER CONNECTION SPECIFIED CONDITION

Tester Connection	Specified Condition
3 - 4	Below 1 Ω
3-4	10 kΩ or higher (Battery voltage applied to terminals 1 and 2)
3 - 5	10 kΩ or higher
3 - 5	Below 1 Ω (Battery voltage applied to terminals 1 and 2)

Fig 1: Identifying Defogger Relay

If the result is not as specified, replace the defogger relay.