Front Axle Hub: Reassembly

INSTALL FRONT AXLE HUB OIL SEAL
1. Using a brass bar and a hammer, install a new oil seal.
  NOTE: Do not damage the oil seal.
  
  Fig 1: Installing Front Axle Hub Oil Seal
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY
1. Using SST and a press, install a new bearing onto the axle hub.
  SST 09649-17010
  
  Fig 2: Identifying Front Axle With ABS Rotor Bearing Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT WHEEL ADJUSTING NUT (for 2WD)
1. Using SST, install a new adjusting nut.
  SST 09318-12010
  
  Torque: 275 N*m (2,804 kgf*cm, 203 ft.*lbf)
  
  Fig 3: Installing Front Wheel Adjusting Nut (For 2WD)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT AXLE HUB
1. Apply MP grease to a new O-ring.
2. Install the new O-ring onto the axle hub.
3. Install the dust cover and axle hub onto the steering knuckle with the 4 bolts.
  Torque: 80 N*m (816 kgf*cm, 59 ft.*lbf)
  
  Fig 4: Identifying Front Axle Hub Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL KNUCKLE GREASE RETAINER CAP (for 2WD)
1. Using a brass bar and a hammer, install a new retainer cap.
  NOTE: Do not damage the retainer cap.
  
  Fig 5: Installing Knuckle Grease Retainer Cap (2WD)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING KNUCKLE OIL SEAL (for 4WD)
1. Using SST and a press, install a new oil seal.
  SST 09527-17011, 09950-70010 (09951-07100), 09951-01000
  
  Fig 6: Identifying Steering Knuckle Oil Seal With SST (For 4WD)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002