Front Stabilizer Bar: Removal

1. Remove the 2 nuts and stabilizer link.

   HINT:

   If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

   Fig 1: Identifying Stabilizer Link Assembly RH Nuts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

The removal procedure for the RH side is the same as that for the LH side.

1. Remove the 4 bolts and 2 stabilizer brackets and remove the stabilizer bar.

1. Remove the 2 stabilizer bar bushes from the stabilizer bar.
   Fig 2: Identifying Stabilizer Bracket RH Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002