Transfer Assembly: Installation

1. Install the transfer onto the transmission.
2. Install the 2 clamps and 8 bolts.

   Torque: 24 N*m (244 kgf*cm, 17 ft.*lbf) 

1. Install the automatic transmission (see INSTALLATION ).

1. Install the protector with the 4 bolts.

   Torque: 18 N*m (183 kgf*cm, 13 ft.*lbf) 

   Fig 1: Identifying Transfer Case Lower Protector Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf) 

1. Perform initialization (See INITIALIZATION ).
   NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.