FixVault
Home › Toyota › 2009 › FJ Cruiser 4WD, Part Time › Repair and Diagnosis › Transmission › Transfer Case -VF2A › Transfer Assembly › Removal

Transfer Assembly: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. DRAIN TRANSFER OIL 
  3. REMOVE LOWER TRANSFER CASE PROTECTOR 
    1. Remove the 4 bolts and protector.
      Fig 1: Identifying Transfer Case Lower Protector Bolts
      G04963809Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission) 
    1. A750F:

      Remove the automatic transmission (see REMOVAL ).

  5. REMOVE TRANSFER ASSEMBLY 
    1. Remove the 8 bolts and 2 clamps.
    2. Remove the transfer from the transmission.
About FixVault