FixVault
Home › Toyota › 2009 › FJ Cruiser RWD › Repair and Diagnosis › Brakes › Traction Control › Brake Control System › Front Speed Sensor › Removal

Front Speed Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE FRONT WHEEL 
  3. REMOVE FRONT SPEED SENSOR 
    1. Disconnect the skid control sensor wire.
    2. Using a 5 mm hexagon wrench, remove the bolt and the front speed sensor.
      NOTE:
      • Do not attach any foreign matter to the sensor tip.
      • Ensure that no foreign matter enters the sensor installation part.
        Fig 1: Identifying Front Speed Sensor Wire Connector And Bolt
        G05112381Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault