VSC Off Switch: Inspection
- INSPECT VSC OFF SWITCH
- Measure the resistance according to the value (s) in the table below.
Standard resistance
RESISTANCE SPECIFICATIONTester Connection Switch Condition Specified Condition 3-6 Switch is not pushed in 10 kΩ or higher 3-6 Switch is pushed in Below 25 Ω If the result is not as specified, replace the switch.
- Check the illumination operation.
Standard resistance
RESISTANCE SPECIFICATIONTester Connection Switch Condition Specified Condition 4-5 Battery's positive (+) lead connected to terminal 5 and negative (-) lead to terminal 4 LED illuminates If the result is not as specified, replace the switch.
- Measure the resistance according to the value (s) in the table below.