FixVault
Home › Toyota › 2009 › Highlander Base, 3.5 S, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System (2GR-FE) - System And Component Testing, Removal, Inspection And Installation › Mass Air Flow Meter › Removal

Mass Air Flow Meter: Removal

  1. REMOVE MASS AIR FLOW METER 
    1. Disconnect the mass air flow meter connector.
    2. Remove the 2 screws and mass air flow meter.
      Fig 1: Locating Mass Air Flow Meter Screws And Connector
      G05414038Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault