FixVault
Home › Toyota › 2009 › Highlander Base, 3.5 S, FWD › Repair and Diagnosis › Engine Performance › System › Engine Control System (2GR-FE) - System And Component Testing, Removal, Inspection And Installation › Accelerator Pedal Rod › Removal

Accelerator Pedal Rod: Removal

  1. REMOVE ACCELERATOR PEDAL ASSEMBLY 
    1. Disconnect the accelerator pedal assembly connector.
    2. Remove the 2 nuts and accelerator pedal assembly.
      Fig 1: Locating Accelerator Pedal Assembly Nuts And Connector
      G05414035Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault