Inspection Procedure

1. Check for foreign matter around the switch that might prevent operation.

   OK: No foreign matter is found. 

   NG: REMOVE ANY FOREIGN MATTER 

   OK: Go to Next Step 

1. Enter the "Display Check" mode and select "Panel Switch Check Mode" (See OPERATION CHECK  ).
2. Operate the abnormal switch and check if the switch name and status are correctly displayed.

   OK: The switch name and status are correctly displayed as operated. 

NG: GO TO "STEERING PAD SWITCH CIRCUIT"  (See STEERING PAD SWITCH CIRCUIT  )

Fig 1: Display - Panel Switch Check Mode

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

OK: REPLACE MULTI-DISPLAY  (See MULTI-DISPLAY (W/NAVIGATION SYSTEM)  )