Seat Memory Switch: Inspection
- INSPECT SEAT MEMORY SWITCH
- Measure the resistance according to the value (s) in the table below.
Standard Resistance
RESISTANCE SPECIFICATIONTester Connection Switch Condition Specified Condition 4 (M1) - 6 (E) 1 switch pressed Below 1 Ω 3 (M2) - 6 (E) 2 switch pressed 2 (M3) - 6 (E) 3 switch pressed 5 (MRY) - 6 (E) SET switch pressed If the result is not as specified, replace the seat memory switch.
- Measure the resistance according to the value (s) in the table below.