FixVault
Home › Toyota › 2009 › Land Cruiser › Repair and Diagnosis › Electrical › Body Electrical › Power Outlets (Ext) › Towing Converter Relay › Installation

Towing Converter Relay: Installation

  1. INSTALL TOWING CONVERTER RELAY 

    HINT:

    A bolt without a torque specification is shown in the standard bolt chart (See SPECIFIED TORQUE FOR STANDARD BOLTS ).

    Fig 1: Locating Towing Converter Relay Bolts
    G05637238Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Install the towing converter relay.
    2. Connect the connector.
  2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH  (See INSTALLATION )
  3. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK  (See INSTALLATION )
  4. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE  (See INSTALLATION )
  5. INSTALL REAR DOOR SCUFF PLATE LH  (See INSTALLATION )
    Fig 2: Locating Towing Converter Relay Bolts
    G05637238Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL REAR STEP COVER  (See INSTALLATION )
  7. REMOVE REAR NO. 2 SEAT ASSEMBLY LH 
    1. Install the rear No. 2 seat assembly LH (See INSTALLATION ).
  8. REMOVE REAR NO. 2 SEAT ASSEMBLY RH 
    1. Install the rear No. 2 seat assembly RH (See INSTALLATION ).
  9. CHECK TOWING SOCKET OPERATION 
About FixVault