Fuel Sender Gauge Assembly: Installation

INSTALL FUEL SENDER GAUGE ASSEMBLY
1. Set the sender gauge to the fuel sub-tank. Then slide the sender gauge downward to install it.
  
  Fig 1: Sliding Sender Gauge Downward On Fuel Sub-Tank
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the fuel sender gauge connector.
  
  Fig 2: Locating Fuel Sender Gauge Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
1. Install the fuel suction with pump and gauge tube (See INSTALLATION ).