FixVault
Home › Toyota › 2009 › Land Cruiser › Repair and Diagnosis › Engine Performance › System › Engine Control System - Circuit Tests And Service Information › Accelerator Pedal › Removal

Accelerator Pedal: Removal

  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY 
    1. Disconnect the accelerator pedal position sensor connector.
    2. Remove the 2 nuts and accelerator pedal.
      Fig 1: Locating Accelerator Pedal Nuts
      G05628237Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault