FixVault
Home › Toyota › 2009 › Land Cruiser › Repair and Diagnosis › Engine Performance › System › Engine Control System - Circuit Tests And Service Information › Camshaft Oil Control Valve › Removal

Camshaft Oil Control Valve: Removal

  1. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE AIR CLEANER HOSE ASSEMBLY  (See REMOVAL )
  3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (Exhaust Side of Bank 1) 
    1. Disconnect the oil control valve connector.
    2. Remove the bolt and oil control valve.
    3. Remove the O-ring from the oil control valve.
      Fig 1: Locating Bolt And Oil Control Valve (Exhaust Side Of Bank 1)
      G05628208Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (Intake Side of Bank 1) 
    1. Disconnect the oil control valve connector.
    2. Remove the bolt and oil control valve.
    3. Remove the O-ring from the oil control valve.
      Fig 2: Locating Bolt And Oil Control Valve (Intake Side Of Bank 1)
      G05628209Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (Intake Side of Bank 2) 
    1. Disconnect the oil control valve connector.
    2. Remove the bolt and oil control valve.
    3. Remove the O-ring from the oil control valve.
      Fig 3: Locating Bolt And Oil Control Valve (Intake Side Of Bank 2)
      G05628210Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (Exhaust Side of Bank 2) 
    1. Disconnect the oil control valve connector.
    2. Remove the bolt and oil control valve.
    3. Remove the O-ring from the oil control valve.
      Fig 4: Locating Bolt And Oil Control Valve (Exhaust Side Of Bank 2)
      G05628211Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault