FixVault
Home › Toyota › 2009 › Matrix Base, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Theft Deterrent & Keyless Entry › Transponder Key Amplifier › Installation

Transponder Key Amplifier: Installation

  1. INSTALL TRANSPONDER KEY AMPLIFIER 
    1. Connect the connector to the transponder key amplifier.
      Fig 1: Locating Transponder Key Amplifier
      G06014402Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Align the transponder key amplifier with the steering column upper bracket. Tilt the amplifier slightly and slide it into position.
    3. Push the transponder key amplifier, and engage the 2 claws to install the transponder key amplifier to the steering column upper bracket.
      Fig 2: Installing Transponder Key Amplifier To Steering Column Upper Bracket
      G06014404Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL UPPER STEERING COLUMN COVER  (See INSTALLATION )
  3. INSTALL LOWER STEERING COLUMN COVER  (See INSTALLATION )
  4. ADJUST SPIRAL CABLE  (See INSTALLATION )
  5. INSTALL STEERING WHEEL ASSEMBLY  (See INSTALLATION )
  6. INSTALL STEERING PAD  (See INSTALLATION )
  7. INSTALL LOWER NO. 3 STEERING WHEEL COVER  (See INSTALLATION )
  8. INSTALL LOWER NO. 2 STEERING WHEEL COVER  (See INSTALLATION )
  9. INSPECT STEERING WHEEL CENTER POINT 
  10. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  11. INSTALL NO. 1 SWITCH HOLE BASE  (See INSTALLATION )
  12. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle)  (See INSTALLATION )
    Fig 3: Aligning Transponder Key Amplifier With Steering Column Upper Bracket
    G06014404Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Automatic Transaxle)  (See INSTALLATION )
  14. INSTALL FRONT NO. 1 CONSOLE BOX INSERT  (See INSTALLATION )
  15. INSTALL FRONT NO. 2 CONSOLE BOX INSERT  (See INSTALLATION )
  16. INSTALL FRONT CONSOLE BOX ASSEMBLY (for 2WD)  (See INSTALLATION )
  17. INSTALL FRONT CONSOLE BOX ASSEMBLY (for 4WD)  (See INSTALLATION )
  18. INSTALL CONSOLE BOX CARPET 
  19. INSTALL NO. 2 SWITCH HOLE BASE  (See INSTALLATION )
  20. INSTALL FRONT UPPER CONSOLE BOX  (See INSTALLATION )
  21. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY  (See INSTALLATION )
  22. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle)  (See INSTALLATION )
  23. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle)  (See INSTALLATION )
  24. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)  (See INSTALLATION )
  25. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)  (See INSTALLATION )
  26. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY  (See INSTALLATION )
  27. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  28. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  29. INSPECT SRS WARNING LIGHT 

    (See DIAGNOSIS SYSTEM )

About FixVault