On-Vehicle Inspection
- INSPECT INTEGRATION RELAY
- Remove the integration relay from the engine room relay block.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
RESISTANCE REFERENCE
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| C1 - A8 | When battery voltage is not applied to terminals A6 and A7 | 10 kΩ or higher |
| C1 - A8 | When battery voltage is applied to terminals A6 and A7 | Below 1 Ω |
If the result is not as specified, replace the integration relay.