Front Strut Bar: Disposal

DISPOSE OF SUSPENSION TOWER DAMPER ASSEMBLY
1. Fully extend the suspension tower damper assembly.
2. Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.
  A to B:
  
  10 mm (0.394 in.)
  NOTE:
  - Be careful when drilling because shards of metal may fly about, so always use the proper safety equipment.
  - The gas is colorless, odorless and non-poisonous.
    
    Fig 1: Identifying Drill Hole Mark
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002