FixVault
Home › Toyota › 2009 › Matrix Base, Standard › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Networking › Network Gateway Ecu › Removal

Network Gateway Ecu: Removal

  1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY  (See REMOVAL )
  2. REMOVE NETWORK GATEWAY ECU 
    1. Disconnect the connector.
      Fig 1: Locating Network Gateway ECU Connector
      G06036307Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and network gateway ECU.
      Fig 2: Locating Network Gateway ECU And Mounting Bolt
      G06036308Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault