FixVault
Home › Toyota › 2009 › Matrix Base, Standard › Repair and Diagnosis › Engine Performance › Engine Control System (2ZR-FE) › Crankshaft Position Sensor › Removal

Crankshaft Position Sensor: Removal

  1. REMOVE ENGINE UNDER COVER RH 
  2. REMOVE CRANK POSITION SENSOR 
    1. Disconnect the crank position sensor connector.
    2. Remove the bolt and crank position sensor.
      Fig 1: Locating Bolt And Crank Position Sensor
      G05398770Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault