FixVault

Manual Transaxle Oil: Replacement

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE ENGINE UNDER COVER LH 
  2. DRAIN MANUAL TRANSAXLE OIL 
    1. Remove the filler plug and the gasket.
    2. Remove the drain plug and gasket, and then drain the manual transaxle oil.
    3. Install a new gasket and the drain plug.

      Torque: 49 N*m (499 kgf*cm, 36 ft.*lbf) 

  3. ADD MANUAL TRANSAXLE OIL 
    1. Add manual transaxle oil.
    2. Install the transmission filler plug and a new gasket.

      Torque: 49 N*m (499 kgf*cm, 36 ft.*lbf) 

  4. INSPECT MANUAL TRANSAXLE OIL  (See ON-VEHICLE INSPECTION  )
  5. INSTALL ENGINE UNDER COVER LH 
    Fig 1: Inspecting Transaxle Oil
    G06012659Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002