Shift And Select Lever Shaft: Disassembly

REMOVE FLOOR SHIFT CONTROL BELLCRANK DUST COVER
1. Remove the floor shift control bellcrank dust cover from the selecting bellcrank assembly.
  
  Fig 1: Locating Floor Shift Control Bellcrank Dust Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 SELECTING BELLCRANK DUST COVER
1. Remove the No. 1 selecting bellcrank dust cover from the selecting bellcrank.
  
  Fig 2: Locating No. 1 Selecting Bellcrank Dust Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 SELECTING BELLCRANK PLATE WASHER
1. Remove the nut, spring washer, and selecting bellcrank plate washer from the selecting bellcrank.
  
  Fig 3: Locating Nut, Spring Washer, And Selecting Bellcrank Plate Washer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SELECTING BELLCRANK
1. Remove the selecting bellcrank from the selecting bellcrank support.
  
  Fig 4: Locating Selecting Bellcrank
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 SELECTING BELLCRANK DUST COVER
1. Remove the No. 2 selecting bellcrank dust cover from the selecting bellcrank support.
  
  Fig 5: Locating No. 2 Selecting Bellcrank Dust Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 SELECTING BELLCRANK BUSHING
1. Remove the 2 No. 2 selecting bellcrank bushings from the selecting bellcrank support.
  
  Fig 6: Locating No. 2 Selecting Bellcrank Bushings
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FLOOR SHIFT CONTROL SHAFT ASSEMBLY
1. Remove the nut, spring washer, and floor shift control shaft assembly from the selecting bellcrank support.
  
  Fig 7: Locating Nut, Spring Washer And Floor Shift Control Shaft Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 SELECT SPRING SEAT
1. Using a screwdriver, remove the E-ring, No. 2 select spring seat and compression spring from the shift and select lever shaft.
  
  Fig 8: Removing No. 2 Select Spring Seat
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE INNER NO. 2 SHIFT LEVER
1. Using a pin punch (ø5 mm) and a hammer, remove the shift inner lever slotted spring pin and inner No. 2 shift lever from the shift and select lever shaft.
  HINT:
  
  Check the orientation of the inner No. 2 shift lever.
  
  Fig 9: Removing Shift Inner Lever Slotted Spring Pin And Inner No. 2 Shift Lever
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE INNER NO. 1 SHIFT LEVER
1. Using a pin punch (ø5 mm) and a hammer, remove the shift inner lever slotted spring pin, inner No. 1 shift lever, and shift interlock plate from the shift and select lever shaft.
  HINT:
  
  Check the orientation of the inner No. 1 shift lever.
  
  Fig 10: Removing Shift Inner Lever Slotted Spring Pin, Inner No. 1 Shift Lever And Shift Interlock Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SELECT INNER LEVER
1. Using a pin punch (ø5 mm) and a hammer, remove the select inner lever slotted spring pin, select inner lever, No. 1 select return compression spring, and No. 1 select spring seat from the shift and select lever shaft.
  HINT:
  
  Check the orientation of the select inner lever.
  
  Fig 11: Removing Select Inner Lever Slotted Spring Pin, Select Inner Lever, No. 1 Select Return Compression Spring And No. 1 Select Spring Seat
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 SELECT SPRING SEAT SHAFT SNAP RING
1. Using 2 screwdrivers and a hammer, remove the No. 1 select spring seat shaft snap ring.
  
  Fig 12: Removing No. 1 Select Spring Seat Shaft Snap Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002